Универсальная измерительная панель HXDSBOXAI-NR (аналоговый вход 0-10V / 0-20mA / 2-10V / 4-20mA)

Универсальная измерительная панель HXDSBOXAI-NR (аналоговый вход 0-10V / 0-20mA / 2-10V / 4-20mA)

Производитель: MYPIN
Модель: HXDSBOXAI-NR
Наличие: Ожидание 5-10 рабочих дней

Цена: 471.11₴

Количество: - или - в закладки
сравнение

Отзывов: 0 | Написать отзыв

Описание Отзывы (0) Похожие товары (27)

Мультифункциональный индикатор может измерять токовый или потенциальный сигнал. Может использоваться с двухпроводными токовыми трансформаторами, датчиками давления, тензометрами, резистивными трансмиттерами давления, потенциометрами и другими сенсорами.

The universal analog input display meter can be matched with various sensors with analog output to display the actual physical quantity. Such as temperature transmitter, frequency converter, motor speed, pressure, liquid level, concentration, etc.
The instrument supports current input or voltage input.
Default adaptation: 0-10V, 2-10V, 0-20mA, 4-20mA. By setting the bias parameter and gain parameter, it can adapt to other inputs in the range of 0-10V, or 0-20mA.
It is displayed as a percentage by default. You can also set your own display range through F0-2 ~ F0-4.

Main features

rated power supply voltage range: DC6~25V, power consumption: 24V/40mA
power supply anti-reverse connection and surge protection
1 analog input, voltage type or current type can be selected
Voltage type input impedance: >30kQ, current type input impedance: <250Ω
Rich parameter settings (please see the parameter description), with its own button, easily complete the parameter configuration: 0.56 inch 4-digit digital tube
Mechanical size: 79×43×25mm: installation opening: 76.5×39.5mm

Port signal description

PWR: to the positive pole of the power supply DC6~30V
GND: Power and signal ground
Ai: Power and signal ground
mA: Current-type analog input signal configuration interface, short-circuited with A, then configured as current-type input

Indicator light and signal description

Button and digital tube display state transition diagram:

Special note: In the third-level menu, click OK to save the modified parameter value and return to the previous menu, the parameter number is automatically increased by one; and click the SET button to directly return to the previous menu without saving the modified parameter value .Long press or to make the adjustment value change quickly.

Common wiring diagram

Parameter description

The parameters are described as follows:

1. F0 Attendant array display

Parameter	parameter name	Scope and description	Defaults	read / write
F0-0	Collected value monitoring	Monitor the percentage of the current analog input value. Range: 0-100.0%		read-only
F0-1	Display value monitoring	In the display value in "Monitoring Menu" is calculated by F0-0, F0-2~F04.		read-only
F0-2	Display accuracy	The number of decimal places displayed in the "Monitor Menu", range: 0-3.	1	read / write
F0-3	Show minimum	In the "monitoring menu", the value corresponding to "acquisition value" is 0%, the range: -1999~9999	0	read / write
F0-4	Show maximum	In the "Monitoring Menu", the value corresponding to the "Acquisition Value" is 100.0%, the range: 1999~9999	1000	read / write
F0-5	Offline status	0: Not disconnected; 1: Disconnected. (Disconnection detection is set by F1-4) (starting from V2.10)		read-only

2. F1 parameter group-analog configuration parameters

Parameter	parameter name	Scope and description	Defaults
F1-0	Input type selection	0: 0~10V or 0~20mA corresponds to 0~100.0%; 1: 2~10V or 4~20mA corresponds to 0~100.0%, and 0 when it is lower than 2V or 4mA.	0
F1-1	Input filter time	Analog input filter time, range: 0~10.000s. The longer the filtering time, the stronger the filtering	0.200
F1-2	Input gain	Range: 0~1000.0%.	100.0
F1-3	Input offset	-99.9~99.9%, with 10V or 20mA as 100.0%.	0.0
F1-4	Drop detection threshold	Range: 0.0-100.0%. This value is based on 0-10V or 0-20mA as 0.0-100.0% as a reference (and F1-0 and gain offset are not related), the detection is not started if it is less than 0.5, and there is a hysteresis of ±0.3. When the input signal is lower than this value, the meter displays E.oFL. (Starting from V2.10)	0.0
F1-5	Enter the parameter setting selection	Long press SET button for 3s to enter the parameter setting mode Keep pressing SET button for more than 3s Press OK to enter parameter setting mode	0

The analog input gain and offset use formula is: adjustment result = (collected value + offset) × gain, the adjustment result is limited to 0.0～100.0%

The range is 100.0% when greater than 100.0%, and 0.0% when less than 0.0%

Гарантия

Нет отзывов

Написать отзыв

Ваше Имя:

Ваш отзыв: Внимание: HTML не поддерживается! Используйте обычный текст.

Оценка: Плохо Хорошо

Введите код, указанный на картинке: