Режим работы:
Пн.-Пт.: с 10 до 19 часов
Прием заказов online:
круглосуточно без выходных
Телефон:
+38-(050) 967-02-74
Viber:
050 9670274
e-mail:
sale@hi-ip.com
Мы ждем Ваши отзывы о нашей работе на
Facebook
Применяется для измерения расхода керосина, дизельного топлива, масла а также вязких жидкостей
Технические характеристики:
Flow sensor wires:
Measures heavy, light, heating oil, etc.
Specifications
Flow rate range:
Accuracy: ±2%RS (In the standard installation position)
Major measurable liquid: Cold and hot water and heating, light and heavy oil
Maximum operating pressure: 0.5MPa (When the liquid is at 20°C)
Pressure loss: 4 kPa or less
Fluid temperature range: -10 to +70℃ (No condensing)
Responsiveness: -10 to +70℃ 35~85%RH (No condensing)
Length of wire: Approx. 480 mm
Output signal:
Pulse constant: 0.46mL/P
Maximum frequency: Approx. 30Hz
Minimum pulse width: Approx. 0.0065s
Applied voltage range: 3 – 24VDC (*1)
Power consumption: 0.2VA or less
Structure: Splash-proof structure (IP64 compatible) for indoor use
Connection: 13 мм
Major materials of the part exposed to liquid:
(*1) Apply the same voltage to the sensor power supply (red – black) and pulse output (blue and white – black). (Applicable only for open collector output)
Other information
The pull-up resistance R on the side of the open collector output shall be 50 KΩ or less. However, make sure the output sink current (Is) is within 6 mA.
* Apply the same voltage to the sensor power supply (red – black) and pulse output (blue and white – black). (Applicable only to open collector output)
Standard installation position