Режим работы:
Пн.-Пт.: с 10 до 19 часов
Прием заказов online:
круглосуточно без выходных
Телефон:
+38-(050) 967-02-74
Viber:
050 9670274
e-mail:
sale@hi-ip.com
Мы ждем Ваши отзывы о нашей работе на
Facebook
Метод кодирования: Incremental
Power supply voltage: DC5 to 24 V (ripple (p-p): 5% max.)
Current consumption: 80 mA DC Max
Inrush current: approx. 9A (Time: approx.0.3ms)
Разрешающая способность: 1000 P/R
Output phases: A, B and Z
Control output (Output type): NPN open collector output
Control output (Load current): 35mA max (Sink current)
Control output (Residual voltage): 0.4 VDC max (load current: at 35mA max)
Starting positional point: Equipped
Load power supply voltage: 30 VDC max
Max. response frequency: 100 kHz
Phase difference on output: 90 DEG -45 to +45 DEG
Rise and fall times of output:
(Output voltage: 5V, load resistance: 1k OHM, cable length: 2m Max.)
Starting torque: Room temperature: 0.98 mN.m max.
Момент инерции: 1 x 10-6 kg.m max.
Shaft loading:
Max. permissible rotation: 6000 r/min
Mechanical life expectancy: 100 million rotations min.
Protective circuit:
Ambient temperature:
Ambient humidity:
Insulation resistance: 20 MOhm min. at 500 VDC between charged parts and the case
Dielectric strength: 500 VAC at 50/60 Hz for 1 minute between charged parts and the case
Вибростойкость: 10 to 500 Hz, 2-mm or 150 m/s double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance: 1000 m/s for 3 times each in X, Y, and Z directions
Degree of protection: IEC60529: IP50
Connection method: Pre-wired models (Cable length: 2 m)
Material:
Accessories: